Call (800) 952-1973

Prev
Next

NATIONAL 110 UE 1,500 HP SCR DRILLING RIG w/AVAILABLE 500-TON TOP DRIVE

ANY OFFER OVER $4M WILL BE CONSIDERED, WAS $11.4M - WOW

New AC Controls - 80% Refurbished
500-Ton Top Drive Available - Make Offer!

MAKE AN OFFER
Call to Inspect and Buy Today!!!


Call NOW! (800) 952-1973

Listing Details

DRAWWORKS
National 110-UE S/N T-723 (REBUILT)
Drum Grooved for 1 3/8” wire line.
Make up and Brake out cathead.

Drawworks is complete with:
2 Nos. DC Motors: GE -752 RIS & 5GE752AR1B
1 No. Crown-o-matic

1 No. Driller’s Console

1 No. Elmagco 6023 Eddy Current Brake

          Ser. # 7943 W

          Inputs volts: 250V DC

          Amps: 40

          RPM: 600

          Torque: 55500 lbs-ft

          Baylor Control Panel: PWM-20

1 No. Brake cooling system (with water tank equipped with

1 No. of 3X4 Mission Centrifugal pump driven by Electric Motor)

MAST
Lee C. Moore - Ser. #T3768 (RECERTIFIED)
Height 142’ X 30’.
Hook load 1200 klbs / at 12 lines.
Gross nominal load capacity 1,600,000 lbs.
1 No. Mast top section #01 O.D.S
1 No. Mast top section #2 D.S.
1 No. Mast middle section #1 D.S.
1 No. Mast middle section #2 O.D.S
1 No. Mast bottom section #1 D.S.
1 No. Mast bottom section # 2 O.D.S.

Complete with:
1 No. Deadline anchor
1 No. Monkey board
1 No. Stabbing board
Two lines stand pipe
Bull line for rig up 2 – 7/8” dia.

SUBSTRUCTURE
Lee C. Moore (RECERTIFIED)
Set back capacity 700 klbs. Height to rotary beams 24 feet.
Drill floor height 30 feet.
1 No sub base bottom box structure #01
1 No sub base bottom box structure #02
1 No sub base floor #01
1 No sub base floor #02
1 No bottom box driller side
1 No bottom box off driller side

Complete with:

1 No. V-door complete

1 No. Catwalk

1 Set skidding gear

1 No. Hydraulic jack up unit

(Engine driven high pressure pump unit with hoses.)

 

POWER PACKAGE W/SCR
Cat D398 Engine GE Generators (NEEDS REBUILT)
1 No. Cat D-398 engine coupled with Kato Generators feeding into SCR/MCC house.
Each engine is equipped with heavy-duty desert radiator.
Specifications as below:
Engine: Make # Caterpillar
Model # Cat D398 PCTA
Generator: Make # Caterpillar
KW Const.: 800
KVA: 1000
600 V, 60Hz, 3ph,
Cat D399TA (LOW HOURS AND DYNOED BY CAT)
3 No. Cat 399TA engine coupled to Kato alternator KW 1030 volts 600

IPS SCR SYSTEM (COMPLETELY UPGRADED)
4-Bay SCR System complete with MCC panel and air-conditioning unit
SCR Specifications as below:
Make: Integrated Power Systems
SR: 422400
Dwg Index No. # 008-001720
Rated AC Volts: 600 V AC, 3ph, 60Hz

TRANSFORMERS
AC Amps: 4000 Amps
Rated DC Volts: 750 V DC
DC Amps: 1500 Amps
Equipped with following transformers to meet auxiliary demands.

  1. Transformer 10 KVA

                600 V – 240 V

b)   Transformer 112.5 KVA

                600 V – 208 / 120 V

                Make: : MGM Transformer Co.

c)   Transformer 750 KVA

                600 V – 480 V

                Make: MGM Transformer Co.

All this installed on trailers with hydraulic jacking system

MUD PUMPS
Skytop Brewster Model # B-1300T

Specifications:
Input rating: 1300HP
Max Speed: 120
Crankcase oil cap: 110 Gal
Piston lune: 80 gal
(1) MP-1: Skytop, Ser. # B13-7802
 Equipped with:

         a) DC Motors                                              - 2 Nos.

              5GE752AR1A

              5GE752AR1B

         b) Blower motors 10HP                               - 2 Nos.

         c) Supercharger pump                              - 1 No.

         d) Liner cooling pump                               - 1 No.

             Halco 1 C 1.5c

             Model # S1602500144

             With 5hp motor

         e) Lube oil gear pump                                 - 1 No.

             (belt driven)

         f) Pulsation Dampner                                   - 1 No.

            Hydril

            20 Gal, 5000 psi

        g) Pressure relief Valve                                  - 1 No.

            Retsco Reset relief valve

            1500 – 5000 psi

             3” Type – B

(2) MP-2 : Skytop, Ser. # B13 – 7801

         Equipped with:

         a) DC Motors                                                 - 2 Nos.

             5GE752AR1A

             5GE752AR1B

         b) Blower Motors 10 HP                                 - 2 Nos.

         c) Supercharger pump                                 - 1 No.

         d) Liner cooling pump                                  - 1 No.

              Halco 1X1.5c

              Model # S1602500144

              With 5hp motor

         e) Lube oil gear pump                                   - 1 No.

             (belt driven)

          f) Pulsation Damper                                        - 1 No.

              Hydril 20 Gal, 5000 psi

         g) Pressure relief Valve                                     - 1 No.

              Oteco Shear pin type

              P/N # 30550

MUD SYSTEMS
Mud System comprises of following tanks:

          (A)Shaker Tank

                With following compartments:

                1) Trip Tank                -72 bbls

                2) Sand Trap              - 177 bbls

                3) Degasser Tank      -108 bbls

                4) Desander Tank      -101 bbls

                Tank equipped with following :

                a) Shalesshaker         - 2 Nos.

                     Tri-flo SS148MT

                b) Degasser                                       - 1 No.

                     SEE-FLO Type

                     Make : Drilco

                     With 10HP motor

              B1) Poorboy degraser

                c) Desander                                      - 1 No.

                     Tri-flo, 3 Cone 10”

                     Model : 1500 – 3,

                     1500 gpm

                d) Desander pump                         - 1 No.

                    6X8 Mission with

                    100 HP Motor

                e) Trip Tank Pump                         - 1 No.

               (B) Suction Tank

               With following compartments

               1) Mud Cleaner tank       - 186 bbls

               2) Suction – 1                  - 425 bbls

               3) Suction – 2                  - 211 bbls

               4) Suction – 3                  - 220 bbls

               5) Slug pit                        - 102 bbls

              Tank equipped with following :

     a) Mud Cleaner                                            - 1 No.

                Tri-flo, 16 Cone 4”

            b) Agitator 10 HP                                          - 4 Nos.

            c) Agitator 5 HP                                             - 1 No.

            d) Pit level sensors                                         - 2 Nos.

            e) Desilter Pump                                             - 1 No.

     C) Reserve Tank No. 1

     With following compartments:

     1) Reserve – A                        265 bbls

     2) Reserve – B                        270 bbls

     Tank equipped with following :

     a) Agitator 10 hp                                                  - 2 Nos.

     b) Centrifugal pump                                              - 1 No.

          5 X 6R Mission with

         75 HP Motor

     c) Pit Level Sensor                                                - 1 No.

    (D) Reserve Tank No. #2

       With following compartments

        1) Reserve – A                       265 bbls

        2) Reserve – B                                - 270 bbls

        Tank equipped with following :

       a) Agitator 10 hp                   - 2 Nos.

       b) Centrifugal pump              - 2 No.

       5 X 6R Mission with

        75 HP Motor

    (E) Hopper Skid

      Equipped with following:

      a) Hopper                        - 2 Nos.

          Make : Tri-flo

      b) Centrifugal Pump        - 2 Nos.

           6X8R Mission

           with 100 hp motor

    1 No. Water Tank

    Tank equipped with following :

    a) Centrifugal pump                 - 1 No.

    3X4R Demco 178 pump

    with 25hp motor              

    Rated rpm : 807,

    Disch. Pressure : 125 psi

CROWN
Lee C. Moore (REBUILT)
7 X 60” Diameter sheaves. 1 X 60” diameter fast line.

TRAVELLING BLOCK
IDECO-525 Unitized Traveling Hook Block 500 Ton (AVAILABLE)

SWIVEL
Ideco – Truline TL – 500 (AVAILABLE)
500-ton capacity

ROTARY TABLE
Ideco 275 – K (INTERNALLY INSPECTED)
Ideco 27 ½“ with independent drive % transmission
Complete with:
a)   1 No. DC Motor : make # GE 752AR1S

b)   1 No. Transmission : Oilwell

c)   1 No. oil pump with 2 hp motor

AIR TANKS
Air Receiver tanks with relief valve

-       One tank under Engine – 1 skid

 (Max. WP : 200 psi, 120 Gal cap.)

-       Two tanks under sub structure

  (with 1” safety valve, model: S3W-LR,

  set at 150 psi)

WIRELINE UNIT
Mathey
Model # RET
SR # 563
Hydraulic driven wire line unit

CHOKE AND KILL MANIFOLD
3 1/16 10,000 lb.
To be assembled

SPARE PARTS
2 Containers filled with premium spare parts for international market

EXTRA EQUIPMENT AVAILABLE

  1. 500 Bbl. Fuel Tank
  2. Water Tank
  3. Misc. Handling Tools
  4. Varco TDS 3 Ht Top Drive with Certs
  5. 16,000 Ft of 5” S135 Drill Pipe with CAT 4 Inspection
  6. Also Available – Extra Equipment that buyer may want or need (to be negotiated)
 

Listing No. 45