Call (800) 952-1973

Prev
Next

MD COWAN - SUPER SINGLE MD525

Asking Price $4,000,000

1600HP Pumps
90-Day Warranty Parts (USA)
Just Refurbished & Ready to Drill
Stacked, Located in Odessa, TX


BUY THIS LIKE NEW RIG TODAY!
Call to Inspect and Make an OFFER!

Listing Details

DERRICK AND SUBSTRUCTURE  
   
DERRICK/MAST YES – API 4G Monogrammed
   
Make/type: INTERNATIONAL DERRICK SERVICE
(IDS) – API certified
With no set back:  
Height: 72'
Dimensions of base: 8'1" WIDE X 6' DEEP
Dimensions of crown: 8'1" X 6' DEEP
Gross nominal capacity: 825,000 GNC
Static hook load: 550,000 SHL
Minimum number of lines: 8
Ladders: YES
Platform for crown sheave access: YES
Light system explosion proof: YES
MAKE-UP/BREAK-OUT TOOL 1-BLOHM & VOSS Make-up/Break-out wrench WITH UP TO 65,000 FT-LBS.
M/U torque; 85,000 FT-LBS B/O torque
   
SUBSTRUCTURE YES
   
Make/type: IDS
Slip Bowl height (above Ground level): 14' 8"
Length: 48'
Width: 12'
Slip Bowl beam capacity (total): 250 TON
Clear height below Slip Bowl beams (to Ground level): 10'6"
Hydraulic Pipe Arm 1- IDS HYDRAULIC PIPE ARM FOR HANDLING 3-1/2" TO 5" RANGE II or III DRILL PIPE, 6-1/4" TO 8-1/4" DRILL COLLARS & RANGE III CASING W/HYDRAULIC ARM FOR HANDLING PIPE FROM PIPE RACK TO
GRABBERS
   
DRAWWORKS AND ASSOCIATED EQUIPMENT  
   
Drawworks  
Make/type: RIG TECH RT-400B
Engine make/type: CAT C-15 W/ALISON 6-SPD. TRAN.
Rated input power: 540 HP
Drum size (diameter x length): 21" X 25-1/8"
Drum type (grooved/smooth): GROOVED (Lebus)
For drill line size: 1 1/4"
Brake type (disk/drum): DRUM
Brake band size: 42” round x 10” wide
Maximum Hook load -   8 lines: 435,000 LBS
Crown block safety devices: YES
Make/type: RT-400 CROWN PROTECTOR W/BRAKE ASSIST
Auxiliary brake: EATON WCB 424
Independent fresh water cooling system for draw works and air brake: EATON-AIRFLEX MODEL # RT- BWCS-101   400,000# BRAKING
   
Wire line Unit YES
   
Make/model: OIL WORKS  OWI-1000
Wire length (nominal): 12,000'
Wire size: .092 IN
Max working load: 835 LBS
Safe working load: 800 LBS
Depth counter: YES
Pull Indicator NO
   
DERRICK HOISTING EQUIPMENT  
   
Crown Block  
Make/type: IDS
Rated Capacity: 550,000 SHL
No. of sheaves: 8--7 vertical/1horizontal
Sheave diameter: 6-36”; 1-30"; 1-24”
Sheave grooved for line size: 1-1/4"
   
Traveling Block  
Make/type: MD COWAN INTEGRATED 4-SHEAVE SPLIT BLOCK
Rated Capacity: 250 TON
No. of sheaves: 4
sheave diameter: 36"
Sheave grooved for line size: 1-1/4"
   
Drilling Line YES
   
Diameter: 1-1/4"
Construction: BETHLEHEM STEEL AMERICAN RRL/IWRC/EIPS DOMESTIC or
equivalent
Length (original): 2,500'
Drilling line reel: YES
Drum cover: NO
Drilling line drum power driven: Optional
Roller guides: NO
   
Dead Line Anchor  
Make/type: HERCULES HA-119T
Weight sensor: 60,000#
   
SLIP BOWL SYSTEM - NON-ROTATING  
   
Make/type: 1 EA – Varco/ MSPC
Bowl Opening: 2-3/8” / 13- 3/8”
  API Bowls 1, 2, 3
   
Top Drive/Power Swivel  
Make: VENTURETECH
Model: XK-250
Type (electric/hydraulic): HYDRAULIC - SUNSTRAND HYDRAULIC PUMP POWERED BY CATERPILLAR C-18 DIESEL ENGINE
& HYDRAULIC SYSTEM
Rated capacity: 250T
Working pressure: 5,000 PSI
Maximum continuous torque @ 120 rpm: 22,000 FT-LBS
Maximum continuous rotary speed: 160 RPM
Cooling system type: N/A
Upper inside BOP: 2-3/4" INSIDE
Mandrel: 4-1/2" I.F.
100 RPM Dynamic load rating: 140 Tons
Working pressure: 5,000 PSI
Output power: 24,000 ft-lbs
   
POWER SUPPLY SYSTEMS  
   
RIG POWER PLANT GENERATOR HOUSE: 10' WIDE BY 51' LONG W/ NEW SQUARE D
MCC or equivalent
Diesel Engine/Generator Sets (includes camp transformer modular)
Quantity: 2
Make/type: CATERPILLAR / C-15
Maximum continuous power: 540 HP
At rotation speed of: CONSTANT 1200RPM
Equipped with spark arrestors: YES
Mufflers installed: YES – 8” FLANGES
   
AC - Generator  
Quantity: 2
Make/type: CATERPILLAR/455 KW
At rotation speed of: CONSTANT 1200RPM
Output volts: 60 Hz 480 VOLTS
   
Air Compressors - Medium Pressure (rig air):  
Quantity: 1 each
Make: CURTIS
Model: RS30F
Rated Capacity: 102 CFM
Working pressure: 175 PSI
Prime mover (electric/diesel): ELECTRIC
Continuous power: 30 HP
Air Compressor – COLD START CUSTOMER PROVIDED
   
AIR RECEIVERS NOV – 1 each
Volume (total): 600 cu. Ft.
Maximum Pressure 175 PSI
Location: Unit Trailer
   
FUEL TANK  
Standard Cylindrical Tank/ Optional Rectangular MDC FABRICATED
Cylindrical 8' diameter 265 BBL. (10,000 GAL)
   
WELL CONTROL  
   
All appropriate components H2S rated No
   
RAM TYPE PREVENTERS YES
Quantity: 1
Make/model: CPTDC
Type (single / double / triple): DOUBLE
Size: 11 IN
Working pressure: 5,000 PSI
Ram locks: YES
Type (manual/hydraulic): MANUAL
Side outlets: 4
Size: 4"
WP: 5,000 PSI
Bottom connection: 11" x 5M
Top connection: 11" x 5M
   
AVAILABLE RAMS (INSTALLED & SPARE)  
Quantity / type / size: BLIND (1 set)
Quantity / type / size: PIPE: 4-1/2" (1 set); 5-1/2” (1 set)
   
ANNULAR PREVENTER Yes
Quantity: 1
Make/type: CP International / Shaffer - type
Size: 11” x 5M
Working pressure: 5,000 psi
Bottom connection: 5,000 psi
Top connection: 5,000 psi
   
KILL LINE VALVES NO
Quantity: 0
Make/type:  
Size: 2-1/16 IN
Working pressure: 5,000 PSI
Hydraulic / manual / non-return: MANUAL
   
BOP CONTROL SYSTEM  
   
Accumulator Unit  
Make/model: Cameron “Bison”
Location: LOWER DOGHOUSE SKID
Fluid reservoir capacity: 160 US GALLONS
Total accumulator capacity (with out prior recharge): 160 US GALLONS
System working pressure: 3,000 PSI
Total useful accumulator volume equals all preventer opening and closing volumes: 160/YES
   
Accumulator Hydraulic Pumps  
Electric Driven:  
Quantity: 1 - TRIPLEX
Make/model: BEAR EQUIPMENT/BX10
Each driven by motor of power: 20HP
At operating pressure: 3,000 PSI
   
Air Driven:  
Quantity: 2
Make/model: SPEED FLOW/60:1
Flow rate of each pump: 8 GPM
At operating pressure: 3,000 PSI
   
Primary Control Panel  
   
Control panel make/model: Cameron – 5 Station
Location: DOG HOUSE SKID
Panel controls for the following functions:  
Annular BOP: YES
Ram BOP's: YES
Choke line valve: YES
System pressure regulator: YES
Pressure regulator for annular: YES
Quantity of pressure gauges: 3
   
Remote Control Panel YES – 5 Station
Location: not installed
   
CHOKE MANIFOLD  
Nominal size: 2" & 4"
Minimum ID: 2 1/16”
Maximum WP: 5,000 PSI
Quantity of fixed chokes: 2
Make/model: VALVE WORKS USA
Size (ID): 3/4" ORIFICE 1 1/2" OD
Quantity of adjustable chokes: 2
Make/model: SWECO
Size (ID): 2-1/16 IN
Power choke remote control panel: NO
Make/model: N/A
Size (ID): N/A
   
CHOKE LINE (BOP to MANIFOLD) YES
Quantity: 1
Make/type: Midwest Hose/non-metal braided
ID: 3"
Working pressure: 5,000 PSI
H2S Service: NO
   
FLEXIBLE BOP CONTROL HOSES YES
Quantity: 10
Make/type: SYNFLEX TYPE "B"
ID: 1"
Working pressure: 5,000 PSI
Fire resistant: YES
   
MUD SYSTEM  
   
MUD PUMPS YES
Quantity: 2
Make: BOMCO
Model: F-1600
Horsepower: 1600
Type (triplex / duplex): TRIPLEX
Mud pumps drive motors / engines: CATERPILLAR 3512C
Motor type: Variable Speed - Diesel
Continuous power rating per engine: 1200 RPM FOR 3512
Fluid end type: BOMCO (Interchangeable w/Emsco F- 1600)
Maximum working pressure: 5,000 PSI
Test pressure: 5,000 PSI
Pump stroke counter type: CUSTOMER TO FURNISH
Supercharging pump type: YES
Driven by motor of power: PINION SHAFT
Discharge/suction line ID: 3 1/2" X ID
Mud pump pulsation dampener type: AS SUPPLIED BY BOMCO
Reset relief valve: 3"
   
Torque Converters  
Quantity: 2 (1 per mud pump)
Make/type: U.S. Oilworks / C300-100
   
TRANSFER PUMPS / MIXING PUMPS YES
Mixing Pumps  
Quantity: 4
Make/model: 5" X 6" W/50 H.P. ELECTRIC MOTORS-MISSION MAGNUM
Output capacity: 11" IMPELLER 80 TO 110 GALLONS PER MINUTE
Drive motor type: ELECTRIC 50HP
Power output: N/A
   
CHARGING PUMPS YES
Quantity: 2 (1 per pump)
Make/model: 6”x8” w/ 75 HP ELECTRIC MOTORS- MISSION MAGNUM
Output capacity: 14" IMPELLER-80 TO 110 GALLONS PER MINUTE
   
STANDPIPE MANIFOLD YES
Quantity of standpipes: 1 (MUD)
Standpipe/ID: 4”/ 3” ID
Kill line outlet: YES
fill-up like outlet: YES
Bleed-off line outlet: YES
Outlet for sensor YES
   
ROTARY HOSE YES
Quantity 2
Make/type: Midwest Hose
ID x Length: 4" ID X 43' L.
Working pressure: 5,000 PSI
Snubbing lines: YES
   
JUMPER HOSE  
Quantity: 2
Make/type: Midwest Hose
ID x Length: 4" x LENGTH DEPENDS ON PUMP RIG UP
Working pressure: 5,000 PSI
Snubbing lines: YES
   
LOW PRESSURE MUD SYSTEMS 2-12'W X 5'H X 40' L W/10' PORCH ON END FOR PUMPS V-CRIMPED; DESIGNED TO ELIMINATE SURFACE TRIP HAZARDS ON WALKING SURFACE
MUD TANKS (CURVED BOTTOMS) YES
Quantity: 2
Total capacity (usable): ~700 bbls
Usable capacity No. 1: ~350
Type (active / reserve): ACTIVE
Height: 5 ft.
Mixer: YES
High Pressure Mud guns: NO
Usable capacity No. 2: ~350
Type (active / reserve): ACTIVE
Height: 5
Mixer: YES
High Pressure Mud guns: YES
   
SHALE SHAKER  
Quantity: 1
Make/model: VORTEX FLUID SYSTEM
Type: ORBITAL 3000 DUAL SHAKER
Nominal flow rate (total): 1000 gal.
   
MUD AGITATORS YES
Quantity: 5
Make/model: Nord / SK9042.1VF – 210TC or
equivalent
Driven by motor of power: 10 HP
Located in tanks: YES
Impeller Blades, Type YES
   
MUD HOPPER YES
Quantity: 1
Make/model: Oilworks mixing hopper
Feed pump make/model: 5" X 6" MISSION MAGNUM
Type/size: 11" IMPELLER
Capacity: 450
Drive motor hp: 50
Is feed pump dedicated to mud hopper(s): YES
   
DESANDER YES – US Oilworks
Cone No. & size 2 - 10"
   
DESILTER YES – US Oilworks
Cone No. & size 10 - 4” cone
   
   
TOP/BOTTOM DOGHOUSE MD COWAN FABRICATED; HYDRAULICALLY RAISED:
TOP/BOTTOM DOG HOUSE SKID
  WITH CHANGE LOCKERS AND
HEATERS; DRESSED FOR DRILLING OPERATIONS
   
PIPE RACKS 3 SETS (6 EACH)
   
JUNK BOX 1 EACH
   
WATER TANK MDC FABRICATED
Rectangular V-crimp 8’ Wide 400 bbl.
   
Centrifugal Pumps 2
Type/Size: MISSION MAGNUM 2" X 3" CENTRIF.
PUMP Or equivalent
Drive Motor HP: 20 HP MOTORS
   
BRAKE COOLING/LUBESTER SKID  
Additional   skid   containing   a   brake   cooling   unit   and lubrication bulk handling equipment. MDC Fabricated Skid
Brake cooling unit Rig Tech RTBSS-101
Bulk Handling Lubester 5 EA BULK LUBE TOTES; 350 GAL. EA; STAINLESS STEEL TANKS INCLUDED FOR ENGINE OIL,
HYDRAULIC OIL, GEAR OIL, ENGINE COOLANT, AND WASTE OIL
Tote  
Make: Custom Metalcraft, Inc.
Model: TranStore 515829
   
Hose Reel (4 total) 50 ft; 1/2” hose
Make: Lincoln
Model: 94300 series “A”
   
Pump for Oil Totes Pneumatic
Make: Lincoln
Model: 84934
   
Pump for Coolant Pneumatic
Make: Lincoln
Model: 85627 series “B”

Listing No. 234